Useful Tips

Draining pool water: just about the important


To pour water into the pool, use a watering hose connected to the water supply or to a submersible pump installed inside the water well. But in this way, water will be poured during the week even into an inflatable or frame pool. Moreover, the water will be supplied to the pool gradually, in connection with this, the pool begins to turn green and, when fully filled, will turn into a swamp. The second step will have to clarify the water and destroy the algae. This will also take a week. This is the easiest way to fill the tank with water. Incidentally, he is more popular, especially among summer residents.

TIP!Do not use water from open sources (ponds, etc.) when filling the pool. Such water contains microorganisms and has a high content of humic acids. As a result, water acquires a greenish tint, which is clearly visible in a thick layer of water. The "treatment" of such water is a rather complicated and painstaking process, which is feasible only with the use of special chemicals.

How to fill the pool with clean water suitable for bathing not only adults but also children?

There are several ways:

  • With the help of a water carrier. You can order a car. With clean industrial water, which is quite suitable for use in the pool. Or drinking water, which is widely used for baby pool. The machine is equipped with a large diameter and length hose. Thanks to what you will calmly make a gulf of water in the pool and you can immediately swim in it. The price depends on the volume of liquid required and on the technical characteristics of the water. But the volume of ordered water should exceed 1 ton.

The cost of ordering a water machine comes from 2000 per flight.

  • The second option is to contact a special organization that is profiled to fill the pools with water. They will tell you which water is best to pour into your tank. They will bring you the required amount to any place, around the clock. The tanker is equipped with long hoses, which is convenient for poor access roads. An application for a car is left free of charge, and there is an opportunity to get advice.

The price of industrial water for the pool is negotiable and goes from 1000 rubles. per cubic meter

  • Another way is to contact the fire department and agree on the possibility of bringing this service to pour water into the pool. But this method is not always correct, since the emergency service is responsible for using working vehicles for their own purposes.
  • Water from the well pumped up by the pump will be perfectly clean. But the pump also will not be able to fill the pool with water at a time.

The water in the pool will be cool enough, so you should wait a bit to get it warmed up. This is especially true for children's pools. Of course, the best way to pour water into the pool is to immediately fill the tank with clean water and turn on the filter. In order that the water does not have to be changed after each bath, and to use not a single season, it is important to monitor its purity.

  • Timely remove floating debris.
  • Vacuum the bottom with a water vacuum cleaner.
  • Monitor the level of stiffness.
  • Carry out chemical water treatment.
  • Use a filter.


Pool bowls can hold different amounts of liquid. The larger the capacity, the more problematic it is to drain it.

Depending on the size of the tank and the technical capabilities available, there are several options where to drain the water from the pool so that this event does not result in a strength test for the owner.

If the site is connected to a central sewage system, then the issue of discharge is uniquely resolved in favor of this option. It is possible to equip such a drain for any type of structures.

Scheme of water discharge

It is most suitable for stationary structures of closed and open type, but seasonal frame and inflatable models are also quite possible to empty in this way. It is only necessary to bring a pipeline of the appropriate diameter, and connect the pool to the main line.

The presence in the district of ravines, gullies, natural reservoirs allows the possibility of lowering water from the pool directly there, if the distance from the house to the place of discharge is small.

This can be done without additional purification of the liquid. According to sanitary standards, it is considered clean and does not harm the environment.

Another option is to build a special drainage pit of such a volume to accommodate the required amount of drains. In order to ensure good absorbency, the lower edge of the pit of the well should abut against a sand or gravel layer of soil.

Drainage of used water can also be arranged in a septic tank, but it should be connected through a special pit or well in order to prevent accidental ingress of sewage into the pool tank.

It is preferable to use the last stage of the septic tank for discharge and not to overload the system with a one-time discharge of a large amount of liquid at once.

Water from small-sized structures can be used to water plants available on the site, but only if it does not contain chemicals.

Admixtures of chlorine and other cleaning agents are harmful to many crops. However, this method is good because it allows you to save by using the same water twice.

Pool drainage

Many owners are interested in the question of how to drain water from their pool. Here, too, everything is individual.

For small inflatable and frame structures, a garden hose will be sufficient, one end of which is connected to the drain hole at the bottom of the bowl, and the other is directed to the discharge point.

If the structure is installed above the receiving tank, the liquid must be drained by gravity.

For the descent of medium-sized temporary and stationary open-type water reservoirs, submersible pumps are used that force the liquid out and transport it to the collection point.

It is not possible to completely drain the pool using this method, but it saves time significantly. In addition, this is the only option if the artificial pond is below the sewer.

Location of the pool pump unit

Water drainage in the pool located indoors is carried out only with the help of stationary pumps. They are installed in the technical room during the construction of the facility and included as necessary.

Completely remove the water at the end of the swimming season only in temporary structures. Freezing water in such a container can cause damage to the housing and premature failure of the product.

And they should not be stored according to instructions not on the street, but in the utility room when folded.

In stationary open-type pools, a complete discharge of water for the winter is not recommended. When preparing the facility for winter, experts advise to first drain the bowl, plug all the supply and drain pipes, and then fill the tank with 50% pure water.

This will compensate for the pressure of the frozen soil on the walls of the pool and prevent its deformation. For any type of pool, the drainage system must be thought out flawlessly. Only then will its operation be long and comfortable.

Why drain water

Many pool owners hope that if the pool has the most advanced cleaning system, then you don’t have to drain the water. However, it is not. There are certain rules that recommend changing even the most crystalline water at least once a year. Sometimes, you have to do it much more often.

In some cases, water needs to be drained not in full, but in part:

  • to clean up small debris. It’s not a secret to anyone that garbage, leaflets, insects and residues of human life accumulate in water (fat, hair, skin particles, sweat). Large debris is easy to clean with a net or filter systems. Small debris can remain in the water in the form of plaque or oily film on the surface or on the walls at the water level. To remove such dirt, partial pumping of water from the pool is necessary. After this, the greasy rim and other components containing dirt must be cleaned. Next, clean water is poured to the desired level,
  • to carry out repairs. Most often, lighting fixtures break. To replace most of them, you often need to drain part of the water. To avoid this need, you can buy special devices that can be replaced directly under water. Such devices will cost an order of magnitude more expensive. In the bowl itself, too, for some reason, the tightness may be broken. If a breakdown or crack formed in the upper or middle part, then the water can not be drained completely, but 5-10 centimeters below the problem area. After the repair is completed, the volume of water is replenished,
  • to prepare the pool for wintering. Some skimmer cleaning systems do not have a drain function, and then you need to figure out how to drain a certain amount of water. It is impossible to leave it in full, as this can lead to deformation of the entire structure.
Drain water from the pool for many reasons.

It will be necessary to completely drain the water in such cases:

  • to restore the bottom or bottom of the pool,
  • to remodel the pool or do global repairs,
  • to properly prepare the pond for the winter. Full drainage is necessary in models that do not provide for wintering. Such pools are not made of frost-resistant materials, so they need to be completely dried, cleaned and collected for the winter,
  • to clear the pool of a dead animal. If such a nuisance has occurred, then the pool must be emptied and rinsed thoroughly using chemical disinfectants. Swimming in such water is life threatening!

How to drain water

To drain the water, you need to connect the hoses to the drain holes, if provided for in your model. Some designs (especially inflatable ones) have drain valves. In order not to turn the site into a swamp, it is better to connect hoses to them and drain the water to the selected place.

The pump will help speed up the process in order to pump out water from the pool. Without pumping equipment, the middle pool will be empty after 10 hours. Residues can be removed using a bucket or other improvised means.

It is impossible to pump out fluid from large capital facilities quickly. Better to allocate enough time for this. If you hurry, a sharp change in pressure on the external and internal walls can ruin the tank. Microcracks can form that are very difficult to repair.

To quickly drain the pool, you can connect a pump

Which pump to choose for this purpose?

There are several types of devices:

  • submersible. This design is quite simple. Just put the device in a pond and start it. It can be used in pools, cesspools or basements. The advantages are low cost, prevalence, light weight and dimensions. But the minus is the small power, so they are not suitable for large structures,
  • surface. Such a device is located at the top, and the hose is lowered into the pond. This technique is quite powerful and can quickly empty a rather large tank.

Where to drain the water

Where to put so much water? A small 4 by 2 meter pool may contain about 20 m3 of liquid. What to say about large pools.

Water discharge can be carried out:

  • to the ground,
  • downpours,
  • into the cesspool
  • into a lake or river, if any, on or near the site,
  • to the central sewer,
  • to the receiver.

To water the plot

Owners of an inflatable or small frame structure can spend water on watering beds or flowers on a personal plot. A hose and a low power pump must be connected to the drain holes. You can do without it, then the pressure will not be very strong. You can fix the hose and go about your business, but still it is better to control the process so that the site does not turn into a swamp. Also with this water you can wash the paths of pavers, stones or asphalt.

Water from the pool can be watered

This method is not suitable for large bodies of water or pools in which water was chlorinated. Such a liquid can’t be categorically used for watering plants, otherwise you can simply destroy all living things.

Storm drainage

If you are a happy owner of a stormwater drainage system on a site, then it is easiest to get rid of pool water. This option allows you to quickly drain the liquid without flooding your yard and the neighbor. Typically, storm drains are designed for a large amount of rainfall, so there should be no problems with capacity. For pumping it is enough to put one end of the hose in the pool, and the other in the stormwater.

Water in a cesspool

This option is only suitable for owners of very small ponds or very large cesspools. Typically, a cesspool is designed for 1-2 cubic meters of water. If the volume is much larger, then the hole will clog very quickly and create additional problems for you. It will be necessary to call specialists to pump the pit.

Discharge to the pond

Drain the liquid in a lake or rivulet is the easiest option. You can also dump it into a ravine nearby. This method is suitable if the source is not more than 25 m from the pool. If this rule is not observed, physical laws will not allow water to leave, or it will do it extremely slowly.

You can drain the water into the nearest body of water or a ravine.

Water can be drained into the natural environment only if you do not use chemistry. If the water was chlorinated, it should be drained only into the sewer, since there it will go through several degrees of purification and will not be harmful to the environment.

Sewer drain

The most convenient and correct method is to drain water into the sewer. In order to have such an opportunity, it is necessary to foresee this in the design. To do this, leave a drain hole at the bottom. This will quickly get rid of all the fluid. A pump to drain water from the pool may not be needed, since the liquid will leave under the pressure of itself.

For the system to serve for a long time and reliably, it is necessary to lay pipes that can distill the right amount of water in a certain time. Optimum are pipes with a diameter of 11-15 centimeters. They need to be laid at a slight angle so that water does not accumulate. The smaller the pipe will “loop”, the faster the pond will empty.

If your site has a temporary frame or inflatable structure, you can think of a special drain pipe leading to the sewer. Sometimes, local laws place restrictions on the amount of liquid discharged into the sewer. Therefore, it is better to know in advance how things are going in your area.

Retraction to the receiver

If there is no way to connect to the sewer, then you can make an impromptu your own. To do this, dig a pit below the level of the reservoir. It is best to find a plot with a slope. Usually make a pit with a volume of 1-2 cubic meters. Walls need to be laid with bricks or stones, but not tightly so that the soil can absorb liquid. A concrete cover is laid on top with a special hole for air outlet and hose connection. To drain all the water at once in this case does not work.

You can drain the pool water into a special receiver

Waste water must be cleaned before being used for irrigation or drained into a ditch. The easiest method is to use special filtration devices. Or you can dig out special settling pits with drainage systems. This method is more time-consuming and less effective. It can also ruin the look of your site.

How to wash and store the bowl

How to wash the pool after draining the water? The owners of skeletons or stationary structures should not have problems, since even in an empty form the structure keeps its shape well and it is not difficult to wash the walls. With inflatable structures will have to work a little. Such a pool needs to be washed thoroughly, since if you drain the liquid, the upper ring will simply fall and it will be problematic to wash it.

In the assortment of many companies you can see very convenient accessories for cleaning the pool. These are various sliding brushes and rubber washcloths of various shapes, which can remove dirt even from the most inaccessible places.

The walls and bottom must be thoroughly washed from plaque, mucus and other dirt. Any chemicals must be used strictly following the instructions for your model. After that, frame or inflatable structures need to be dried. To do this, you can use spacers that do not allow fluid to hide in the slots and joints.

The following is a disassembly of the structure. It is recommended to pour the rubber parts of the bowl with talcum powder so that they do not stick together and do not deform. To serve the pool as long as possible it is better to store it in a warm, dry room. Although some designs can survive wintering, temperature differences or moisture can shorten the life of some parts.

1. Drain the pool.

So, at the end of summer, the font is better to remove. The first question on the agenda is to pour out the contents. В зависимости от размера внутри может плескаться от нескольких сот литров до десятков тонн, а это достаточно приличный объём. Есть два основных способа слива с использованием разных приспособлений:

Если речь идёт не о детском бассейне, а о большом Easy Set или каркасном, то следует посмотреть на нижнюю часть его чаши – там расположен клапан. It allows you to connect ordinary garden hoses to the pool, which are on the farm at each cottage. They may have different diameters, but the Intex pool package includes a special nozzle in the form of a tapering tube with notches - the hose is attached directly to it until it stops. After it is attached to the valve, and you get a reliable design, which connects a garden hose of any length. You can pour water in the right place, and as a bonus there will be a wonderful opportunity to water plants and trees growing on the territory! The only limitation is the place where you pour the water should be lower in level, because the pressure is provided by the force of pressure (an example of its action was shown to all of us at school during experiments with communicating vessels). What if there is another courtyard below and you risk spoiling relations with your neighbors by starting to drain your water? We advise you to arm yourself either with long hoses, if possible, or use method number two: Submersible pump.

This useful thing is in most summer cottages and country houses. A small and reasonably inexpensive installation allows you to pump liquids from various depths, which can be useful not only when running a water supply system or eliminating troubles like a flooded basement, but also when draining the water in question. You can buy such a device in any hardware store for home and garden (widespread models - "Brook" and "Kid"). Using a submersible pump, you can transfer liquids almost anywhere, including the sewage system (if any).

2. Wash and dry the bowl.

Having poured water, we pass to the second stage. If you are the owner of the wireframe, then there will be no difficulties - it is by default in the expanded state on the racks. It can be easily washed and it will dry on its own in air. And if you have installed Easy Set with an upper inflatable ring, then you probably noticed that without water inside its bowl does not hold its shape and simply falls down. It is better to wash such models before draining in the filled state in order to clean the plaque from the walls and bottom. Intex's product range includes straight and curved brushes with retractable holders, as well as ready-made convenient cleaning kits - they are ideal not only to maintain cleanliness during the summer season, but also to prepare for seasonal storage. After draining, Easy Set should be dried, straightened in the sun. You can use the tools at hand and build improvised struts and hang material on them - it will dry faster. If you plan to dry on spacers, be careful not to puncture or tear the vinyl in the process.

3. Storage conditions.

And the last stage - we understand how to store the pool in the winter. The bowl should be handled carefully - carefully folded, sprinkled with talcum powder (talcum powder is used so that the rubberized material does not stick together), and must be stored in a dry, warm room, preventing freezing. Temperature limits do not apply to the frame and components - sand pumps or chlorine generators can safely stand all winter in an unheated garage. It is the same with moisture protection - there will be no problems with storing the frame in a humid room in the winter, but if you want to maximize the life of all parts - of course, it is better to find a dry place for all parts.